LED Program Card (Version 1.0) For Platinum Series

LED Program Card (Version 1.0) For Platinum Series

$8.99
In Stock | MSRP $12.00

This program card is used to set the programmable parameters of brushless ESCs. It has a user friendly interface to make setting the programmable parameters very easy. It is pocket-sized making it very convenient to bring to the race track or flying field.

 

This program card has 3 kinds of front panels suitable to the following ESCs:
A)  Product Number:  LED_PC2A    
      Applicable to PLATINUM series aircraft/heli ESCs

B)  Product Number:  LED_PC2B
      Applicable to SEAKING series boat ESCs

C)  Product Number:  LED_PC2C
       Applicable to XERUN and EZRUN series (Version 1.0 ) car ESCs
 
The hardware and software of the above 3 models of program cards are identical. This lets the user print different front panels when using the program card with different ESCs.
 
1  Specifications

1.1 Size: 88mm (L) * 58mm (W) * 14mm (H)
1.2 Weight: 40g.
1.3 Input Voltage: 4.8-6V (If the ESC does not have a built-in BEC, you must use an additional battery pack to supply the program card)   


2  Programmable Items

A)  Programmable items on LED_PC2A (Available for PLATINUM series aircraft/heli ESCs)  
    #1    Brake Setting
    #2    Battery Type
    #3    Low Voltage Protection Mode (Cutoff Mode)
    #4    Low Voltage Protection Threshold (Cutoff Threshold)
    #5    Start Mode
    #6    Timing
    #7    Governor Mode
    #8    Motor Type
    #9    PWM Frequency
    #10  Built-In BEC Output
    #11  Motor Load
    #12  LiPo Cells
 


         Front Panel Picture of LED_PC2A:


B)  The programmable items of LED_PC2B  (Available for SEAKING series boat ESCs)
    #1    Running Mode
    #2    LiPo Cells
    #3    Low Voltage Cutoff Threshold
    #4    Timing
    

     

Front Panel Picture of LED_PC2B:



C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESCs / Version2)
    #1    Running Mode
    #2    Drag Brake Force
    #3    Low Voltage Cut-Off Threshold
    #4    Start Mode
    #5    Maximum Brake Force
    #6    Maximum Reverse Force
    #7    Initial Brake Force
    #8    Throttle Neutral Range
    #9    Timing
    #10  Over-Heating Protection
    #11   Motor Rotation
    #12   LiPo Cells
 

(Note: Item #11 and #12 are not available for XERUN series ESC Version 2, they are only available for EZRUN series ESCs)   

 

          

 

Front Panel Picture of LED_PC2C

 

 

Customer Reviews

Based on 1 review Write a review