Sale
XERUN V10 Brushless Motor G1

XERUN V10 Brushless Motor G1

$41.99 (was $118.00)

Web Special $41.99

ROAR Approved | IFMAR
★★★★★ | MSRP $118.00

Why you want this motor?

  • Compliant with ROAR and IFMAR rules 
  • Mechanical timing adjustable 
  • 200℃ high-temperature high purity copper windings maximize conductivity and reliability
  • Super low resistance multi-layers outlet PCB (Printed Circuit Board) 
  • Removable / replaceable rotor 
  • High RPM precision bearings (Germany Brand: NSK)
  • Powerful high temperature sintered NdFeb (Neodymium) magnets 
  • High efficiency of energy conversion 
  • Also check out our "OUTLAW" version of V10 Motor: Xerun Bandit Motor - Extremely powerful 

Dimension (mm) Can: Ø=36, L=25.5,  External Shaft: Ø=3.17, L=14.6

Model PN KV Ohm Current
w/o
Load 
Amp
Max.
Power*
(W)
Max.
Amp
(A)
Weight
(g)
Rotor
3.5T 30401020041 9700 0.0026 9.2 600 120 173 V10-Ø5-12.5F
4.5T 30401020042 7650 0.0040 6.9 490 108 169
5.5T 30401020043 6450 0.0061 5.8 430 100 172 V10-Ø5-12.5
6.5T 30401020044 5340 0.0080 4.1 390 94 170
7.5T 30401020066 4850 0.0092 3.2 360 88 175
8.5T 30401020036 4165 0.0138 3.2 340 80 168
10.5T 30401020046 3450 0.0208 1.9 250 63 174 V10-Ø7-12.5
13.5T 30401020047 2760 0.0330 1.6 190 49 178
17.5T 30401020048 2210 0.0620 1.1 130 34 172
21.5T 30401020049 1760 0.0890 0.9 100 28 174
 IMPORTANT NOTE: 
►The “Maximum Output Power” is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the “maximum input power” nor the “rating power”, it is calculated by “RPM x Torque / 9550”. Because each factory runs a different testing platform, the above data may vary.
► Max amp is the “Current at Peak Output Power”. It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings/configuration is over its peak (or in other words, “overloaded”.) 
► The “KV” is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.

Model

Main Application

ESC Recommended

3.5T

1/10, 1/12 on-road Modified

XERUN-120A-V3.1

XERUN-Stock Spec-V3.1 *
(See spec)

4.5T

5.5T

1/10 on-road Modified
1/10 4WD off-road Modified

6.5T

1/10 4WD off-road Modified
7.5T 1/10 4WD / 2WD off-road Modified

8.5T

1/10 Drifting
1/10 2WD off-road Modified

10.5T

1/10 Drifting
1/10 on-road Stock

XERUN-120A-V3.1 

XERUN-Stock Spec-V3.1

13.5T

1/10 on-road Stock

17.5T

21.5T 1/10 on-road Stock, 1/10 Crawler

Part List: The XERUN V10 Motor has the parts listed below.

  • Ball bearing x 1 (13.175x9.525x3.967mm) 
  • Rotor x 1 
  • Front casing x 1 
  • Sensor module x 1 
  • Bottom casing x 1
  • Long screws x 3 (M2.50x45mm) 
  • Cover for sensor module x 1 
  • Short screws x 2 (M2.50x6.0mm) 
  • Sensor wires x 2 (80mm, 200mm) 
Rotor Information (Stock & Upgrade Options) Click here
 

Warranty Condition click here

 User Manual Download

- Xerun V10 G1 Motor User's Manual 

Related products:

<< SEE All Motors

>> See V10 G2 Motor

Customer Reviews

Based on 5 reviews Write a review