XRotor Nano 20A 4in1 BLHeli-S DShot600 for FPV Pilots
★★★★★
Starting from $44.99
Starting from $44.99
Highly Integrated yet Compact
- Compact design for easy installation and neat wiring.
- Amp/Volt monitoring port allows flight controller to monitor the voltage & amperage in real time (on condition that the FC supports the function).
- EMF8BB2 chip with an operating frequency of 48MHz for great performance.
- BLHeli-S open source program supports firmware update or ESC programming via throttle signal wire and all the functions of BLHeli-S.
- Damped light mode for rapider motor response.
- Regular PWM throttle mode, OneShot125 throttle mode, OneShot42 throttle mode, and MultiShot throttle mode are supported.
- Dshot150/300/600 digital throttle mode is supported.
- ESC supports a throttle signal of up to 621Hz in regular throttle mode and is compatible with various flight controllers.
Bonus - Get 4 ESCs, Receive Award Winning Super Props Combo by AZURE POWER

Model
|
XRotor Nano 20A 4in1 BLHeli-S DShot600 |
SKU
|
30901068 |
Application | FPVs with 130-280mm Diagonal Wheelbase |
LiPo Power input | 2S-4S |
Cont.Current
|
40Ax4 |
Burst Current | 30Ax4 |
BEC Output |
NO
|
Input wires | 16AWG-85mm* (Red/Black) |
Output Wire | No wires but solder tabs |
Connectors (In/Out) |
XT60 (w/ Wires Soldered on) /no |
Weight / Size | 6g / 32x31.9x5.8mm |
Firmware | BLHeli-S A-H-50 16.5 |
Throttle Calibration | Supported |
ESC Programming | Stick Programming, BLHeliSuite |
DEO | Supported |
OneShot Mode | Supported |
Timing | Supported |
Motor Rotation | Supported |
* Note: All the wire length above is the original length, not the length you see from the outside.
Warranty note
- HOBBYWING products purchased from Hong Kong / Chinese retailers do not confirm CE / North America regulation - deems products non-warranty
- Discount /auction stores such as eBay, etc are considered "non-authorized store" in North America. Products deems non-warranty