Platinum 100A V3
This product is unavailable
WORLD'S BEST ESC
480-550 Class Heli 3D
.70 class fixed-wing airplane 3D
- 10 Amp continuous BEC, 25 peak for version 100A
- BEC Voltage software adjustable
- GOVERNOR STORE mode
- 50MHz processor
- PWM adjustable up to 32KHz
- Industry's BEST throttle response in governor mode
- Separate output for reading / recording engine RPM
- 180 Day Official Limited Warranty
- Recommended Products: Professional LCD Program
Model |
Platinum-100A-V3 (30204101013) |
Main Application |
480-550 class (helis) |
Battery Count |
2-6S LiPo, 5.2V-25.2V |
Cont./Burst Current |
100A/150A (burst in 10 sec) |
BEC Output |
Switch Mode BEC 6.0V/7.4V/8.4V Cont.: 10A Burst: 25A |
Input/Output Wire |
Input: 12AWG / Output:12AWG, 4mm Gold plated bullet connectors |
Weight Size |
104g (W/O Fan) 110g (W/ Fan) |
- High-performance microprocessor with operating frequency up to 50MHz brings excellent compatibility with most motors in the market and high driving efficiency.
- The maximum motor speed can reach: 210,000 RPM for 2-pole, 70,000 RPM for 6-pole and 35,000 RPM for 12-pole.
- Multiple flight modes: Fixed Wing Airplane/ Heli with Governor Off/ Heli with Governor (Elf) / Heli with Governor Store.
- Adjustable throttle range, compatible with various transmitters. It gives smooth, soft & linear speed adjustment and rapid throttle response.
- The microprocessor is powered by a independent DC regulator resulting in better anti-interference performance, which greatly reduces the risk of losing control.
- Built-in highly efficient & high-power (switch mode) BEC lets the output voltage switch between 5.2V / 6.0V / 7.4V / 8.4V. (*For the specific output voltage, please refer to the parameter list below.)
- Brand new easy to operate governor program. Its excellent speed-governing effect makes big rotor blades more stable even under rapid load change.
- ”Restart in auto rotation" can manually interrupt the auto rotation and quickly restart the motor to avoid crashes caused by incorrect operations.
- Independent output port for RPM signals.
- Compatible LCD program box (*optional accessory) has a simple visual interface allowing users to set/revise all the ESC parameters easily. (For detailed information, please refer to the LCD Program Box user manual.)
- The ESC firmware can be upgraded after connecting to a PC via the USB cable on the program box.
- The independent port used for connecting the program box and setting parameters also functions as the output port for the running status data of the ESC. It can make real-time data monitoring and logging possible when coordinated with the data transmission module.
- Multiple protection features including input voltage abnormality protection/ low-voltage cutoff protection/ and throttle signal loss protection prolong the service life of the ESC.
Option |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
|
1 |
Brake |
*Off |
Soft |
Hard |
Very hard |
|
|
|
|
|
|
2 |
BatteryType |
*LiPo |
NiMH |
|
|
|
|
|
|
|
|
3 |
Cutoff Mode |
*Soft cut |
Hard cut |
|
|
|
|
|
|
|
|
4 |
Low-voltage Cutoff Threshold |
Off |
Low |
*Middle |
High |
Customized: |
|
|
|
|
|
5 |
Flight Mode |
Fixed Wing |
Heli |
*Heli |
Heli Governor Store |
|
|
|
|
|
|
6 |
Autorotation Restart Time |
Off |
5sec |
*10sec |
15sec |
30sec |
90sec |
|
|
|
|
7 |
Advanced Timing |
0 |
4 |
8 |
12 |
*15 |
18 |
22 |
26 |
30 |
Customized: |
8 |
PWM Frequency |
8KHz |
16KHz |
24KHz |
*32KHz |
|
|
|
|
|
|
9 |
BEC Voltage |
*5.2V |
6.0V |
7.4V |
8.4V |
|
|
|
|
|
|
10 |
LiPo Cells |
*Auto calculate |
1 cell |
2 cells |
3 cells |
4 cells |
5 cells |
6 cells |
|
|
|
- Read related review article by Radio Show