This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

XR10 PRO (G2) + Bandit G2 Motor Combo


Size: A-XR10Pro(G2)+BanditG2-10.5T



MAP $279.99 | MSRP $396.00

Important Note:
  • Offer valid while stocks last
  • All HOBBYWING products come with a manufacturer limited warranty

What's in the box?
P/N Combo Name Motor Name Main Application


Bandit Brushless Motor

G2 -10.5T Outlaw Edition

1/10 Drifting / On-road Stock


Bandit Brushless Motor

G2 -13.5T Outlaw Edition

1/10 On-road Stock


Bandit Brushless Motor

G2 -17.5T Outlaw Edition

1/10 On-road Stock


Bandit Brushless Motor

G2 -21.5T Outlaw Edition

1/10 on-road Stock, 1/10 Crawler

More than Power 

 Model 10.5T 13.5T 17.5T 21.5T
SKU 30101156 30101157 30101158 30101159
Kv 3800 3000 2300 1900
Ohm 0.0122 0.0198 0.0345 0.0535
Current w/o Load Amp 3.4 2.4 1.9 1.8
Max. Output Power* (W) 325 265 200 155
Max. Amp 90 73 60 42
Dimension (mm) 174 178 172 174
Weight (g) 188g 190g 188g 188g

► The “Maximum Output Power” is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the “maximum input power” nor the “rating power”, it is calculated by “RPM x Torque / 9550”. Because each factory runs a different testing platform, the above data may vary.

► Max Amp is the “Current at Peak Output Power”. It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings/configuration is over its peak (or in other words, “overloaded”.) 

► The “KV” is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.

 Due to extremely high-spec product, BANDIT motor isn't compliant with ROAR, IFMAR, BRCA and JMRCA rules. 

*OTA programmerProfessional LCD Program Box purchased separately
Please note that the factory default setting of the ESC is set for a stock racing driver.  For Rock Crawler, the ESC profile needs to be changed to "Crawler working mode" via LCD program box. 
Perfect match with..