XRotor Micro 4 in 1 ESC (3-4S)
Starting from $43.99
Starting from $43.99
ESC designed for Drone Racing
- 4IN1 ESC w/BEC - Super Small & Light architecture
Highly Integrated architecture: This XRotor 4IN1 Micro ESC not only includes 4 high-performance 20A ESCs, 1 built-in BEC, but also output ports for powering peripherals like FC, camera, and a port for FC checking current and voltage in real time. The highly integrated
structure makes the installation and wiring simple and clean.
Direction Reversal via TX: Rotation direction of every motor can be set via transmitter.
This saves the trouble of re-soldering after connected/soldered motors to
the ESC freely and found motor runs in reverse.
- Performance: High performance 32-bit ARM processor (with the operating frequency of up to 48MHz), built-in drive ICs, imported quality MOSFETs, 3-ounce copper and 6 layers of PCBs guarantees less heat, higher efficiency and rapider response.
- Ultra high efficiency & rapid response - 6 layers of PCBs and other quality components guarantees less heat.
- Motor Block-up Protection: This XRotor 20A 4IN1 Micro ESC cuts off its output to motor immediately when it detects the motor shaft is locked up.
Oneshot125, Oneshot42 & Multishot Modes Ready
- Supports regular throttle signals (with the frequency of up to 621Hz), Oneshot125 (125-250μs) high-speed throttle signals (with the real-time frequency of up to 3.8KHz), also Oneshot42 (42-81μs) and Multishot (2-25μs) super High-speed throttle signals. All this makes communication between FC and ESC more agile, throttle linearity smoother, and throttle response extremely faster
DEO Technology/Active Freewheeling
The DEO (Driving Efficiency Optimization) technology implemented in the ESC has multiple advantages:
- Active braking. When reducing the throttle amount, the motor will decelerate very quickly. This feature enables pilots to more easily perform all maneuvers like sharp turns, altitude changes, and sudden braking.
- Higher driving efficiency, longer flight time.
- Lower ESC temperature and a more reliable operation
||4in1 Micro||4in1 PRO|
|Application||FPVs with 130-280mm Diagonal Wheelbase||FPVs with 250-450mm Diagonal Wheelbase|
|LiPo Power input||3S-4S||2S-4S|
|5.3V & 12V/2A|
|Input wires||16AWG-130mm* (Red/Black)||14AWG-130mm* (Red/Black)|
|no (raw wires)||no (raw wires)|
|Weight / Size||24.5g/54*36*7mm||57g/63.0x50.0x11.7mm|
|Timing||Not Supported||Not Supported|
|Motor Rotation||Not Supported||Not Supported|
* Note: All the wire length above is the original length, not the length you see from the outside.
- HOBBYWING products purchased from Hong Kong / Chinese retailers do not confirm CE / North America regulation - deems products non-warranty
- Discount /auction stores such as eBay, etc are considered "non-authorized store" in North America. Products deems non warranty
Best match with
You may also like
$120.00 From $15.99
$24.00 From $9.99
$39.96 From $9.69